최신버전CCM시험덤프샘플덤프자료

그리고 PassTIP CCM 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1Zb8C0c7W2IUpY9mJJwtsdznS3zCQ_plx

IT업계에서 자신만의 위치를 찾으려면 자격증을 많이 취득하는것이 큰 도움이 될것입니다. Medical Professional 인증 CCM시험은 아주 유용한 시험입니다. Medical Professional 인증CCM시험출제경향을 퍼펙트하게 연구하여PassTIP에서는Medical Professional 인증CCM시험대비덤프를 출시하였습니다. PassTIP에서 제공해드리는Medical Professional 인증CCM시험덤프는 시장에서 판매하고 있는Medical Professional 인증CCM덤프중 가장 최신버전덤프로서 덤프에 있는 문제만 공부하시면 시험통과가 쉬워집니다.

Medical Professional CCM인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. PassTIP는 여러분이Medical Professional CCM인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Medical Professional CCM인증시험패스에 노력을 다합니다. 하지만 우리PassTIP에서는 20시간 좌우만 투자하면 무조건Medical Professional CCM시험을 패스할 수 있도록 도와드립니다.

>> CCM시험덤프샘플 <<

시험준비에 가장 좋은 CCM시험덤프샘플 덤프데모문제 다운받기

만약PassTIP를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게Medical Professional CCM인증시험 자격증을 취득하실 수 있습니다. 우리PassTIP에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.

최신 Medical Professional Exams CCM 무료샘플문제 (Q40-Q45):

질문 # 40
Under the FIDIC Red and Yellow Books (edition 2017), which two of the following elements shall form part of the initial time Programme?

A. All key delivery dates of Plant and Materials.
B. The sequence and timing of the remedial work.
C. The actual progress to date, any delay to such progress and the effects of such delay on other activities (if any).
D. The date on which the right of access to and possession of (each part of) the Site is to be given to the Contractor.

정답：A,D

설명：
Comprehensive and Detailed Explanation:
Option A is correct: The initial programme must include the date for the Contractor's access to the Site.
Option D is correct: Key delivery dates for Plant and Materials are essential elements of the programme.
Option B relates to updated/revised programmes, not the initial programme.
Option C generally relates to remedial work and is part of revised or detailed programmes.
References:
FIDIC Red and Yellow Books 2017 Edition, Sub-Clause 8.3 - Programme
FIDIC Contract Manager Study Guide, Module on Time and Delay Management

질문 # 41
In which one of the following circumstances is it recommended to select the Contractor after a two-stage procurement procedure (pre-qualification + tender procedure)?

A. When the works are simple and of short duration.
B. If there is international financing for the project, it is always necessary to conduct a two-stage procurement procedure.
C. When there is a limited number of capable experienced contractors available and ready to take part in the procurement.
D. In case of large scale works, where there are several companies likely to have an interest in submitting an offer.

정답：D

설명：
Two-stage procurement, involving pre-qualification followed by tender, is typically recommended for large- scale projects where many potential contractors might be interested. This process helps to shortlist qualified contractors, thus streamlining the tender evaluation and increasing the quality and competitiveness of submitted offers.
Option C correctly reflects this approach for complex or large projects where competition needs to be managed.
Option A is incorrect since simple, short-duration projects usually do not require complex procurement.
Option B is incorrect because if only a few capable contractors exist, pre-qualification may be less necessary.
Option D is incorrect as international financing does not always mandate two-stage procurement, although it often influences procurement methods.
References:
FIDIC Contract Manager Study Guide, Module on Contract Formation and Procurement Strategies World Bank Procurement Guidelines and Common Industry Practice

질문 # 42
Under the FIDIC Red and Yellow Books (edition 1999), which two of the following statements are correct regarding the issuance of Interim Payment by the Engineer?
(Choose all correct answers - multiple possibilities)

A. If the Employer considers itself entitled to claim against the Contractor, notice and particulars must first be submitted under Sub-Clause 2.5. The Employer's entitlement is then to be agreed or determined by the Engineer, and then, incorporated as a deduction in a Payment Certificate.
B. The Employer is not bound by the Certificate issued by the Engineer.
C. The Employer is bound by the Certificate issued by the Engineer, and must make payment in full, except for any compensation arising from any claim which the Employer may have against the Contractor.
D. The Employer is bound by the Certificate issued by the Engineer and must make payment in full, irrespective of any entitlement to compensation arising from any claim which the Employer may have against the Contractor.

정답：A,C

설명：
Under the FIDIC Red Book and Yellow Book, 1999 editions, the Engineer issues Interim Payment Certificates certifying the amounts due to the Contractor for completed works and materials on site (Sub- Clause 14.6). The Employer is generally bound by the Payment Certificate and must pay accordingly, except where there is a lawful set-off or compensation claim against the Contractor.
Option A is correct because the Employer must pay the amount certified except for compensation claims that may be offset against the payment (Sub-Clause 14.6).
Option D is also correct: If the Employer intends to claim against the Contractor (e.g., for damages or defects), it must notify the Contractor under Sub-Clause 2.5 and provide particulars. The Engineer then assesses and decides on the claim and incorporates any agreed deductions into the Payment Certificate.
Option B is incorrect because the Employer is indeed bound by the Payment Certificate unless lawful deductions or disputes arise.
Option C is incorrect as the Employer can withhold amounts due for compensation claims once these are properly notified and substantiated.
References:
FIDIC Red and Yellow Books, 1999 Edition, Sub-Clause 14.6 - Interim Payments FIDIC Red and Yellow Books, 1999 Edition, Sub-Clause 2.5 - Employer's Claims FIDIC Contract Manager Study Guide, Module on Payment Procedures and Financial Management

질문 # 43
Under the FIDIC Red Book (edition 2017), the Engineer has suspended works to come to a change of the design of a part of the Works. After expiry of 84 days of suspension, the Contractor gave notice thereof.
Following this notice, the suspension was not lifted within 28 days. What two statements are correct in such a situation?

A. The Contractor may terminate the Contract if it affects the whole Works, but only after it has given a second notice to the Engineer.
B. Under the Contract the Parties cannot agree on further suspension and the Contractor may immediately terminate the Contract if it affects the whole Works.
C. The Contractor cannot terminate the Contract.
D. The Contractor may omit the affected part of Works and deny to carry out such Work going forward, but only after it has given a second notice to the Engineer.

정답：A,B

설명：
Under FIDIC Red Book 2017, if the Engineer suspends works for more than 84 days and the Contractor notifies the Engineer, but the suspension is not lifted within 28 days, the Contractor may terminate the contract if the suspension affects the whole of the Works (Option A).
Additionally, the Contractor must give a second notice before termination (Option C). This process ensures proper communication and adherence to contractual procedures.
Option B is incorrect; termination is allowed under specified conditions.
Option D is incorrect; omission of work is not generally permitted without formal termination.
References:
FIDIC Red Book 2017 Edition, Sub-Clause 8.9 - Suspension by Engineer
FIDIC Contract Manager Study Guide, Module on Suspension and Termination

질문 # 44
The Employer has prepared a contract for a waste-to-energy project based on the FIDIC Yellow Book (edition
1999). You are preparing negotiations on behalf of one of the Subcontractors with the Contractor. The main Contractor will manage the design and build of the Works, whereby the Subcontractor will deliver critical systems regarding power generation and cooling. The Contractor intends to contract the main Contract back- to-back with the Subcontractor. In the proposed back-to-back subcontract, the following amendment is proposed through Particular Conditions:
"Sub-Clause 4.4. The following paragraph is added: The Subcontractor is required to scrutinize the Employer's Requirements in a manner identical to the obligations of the Contractor as stated in Sub-Clause
5.1 of the Main Contract. The Subcontractor will indemnify and hold harmless (up to the maximum liability of the Subcontractor) the Contractor with regard to any error, fault or other defect found in the Employer's Requirements, its items of reference or Contractor's design of the Works for the scope part for which Subcontractor is contracted." What is your advice to the Subcontractor (SC) in regard to entering this proposed subcontract?

A. I would advise the SC not to enter this contract because the Contractor is obliged to act in accordance with good faith. A proposed paragraph like this opposes good faith.
B. I would advise the SC not to enter this contract, because Sub-Clause 4.4 describes the obligations of SC towards Contractor, but this amendment positions the SC in a vulnerable position for claims regarding all errors, faults or other Defects (whether originating from the Employer's Requirements or the design of the Contractor). Essentially, this means the SC becomes liable for the design part, which is within the scope of Contractor even without SC having the opportunity to review it.
C. I would advise the SC to enter the Contract with the request to the Contractor to delete this amendment in the Particular Conditions. If the Contractor does not agree to do so, at least the Subcontractor has tried its best.
D. I would advise the SC to discuss this amendment with the insurance company just to be sure there will be no transfer of risks. This amendment is mainly a consequence of the FIDIC Yellow Book structure, where the Contractor has obligations in terms of scrutinizing the Employer's Requirements. This amendment makes this obligation more explicit. If the insurance company has no problems with insuring the parts which will be delivered by SC to Contractor, the SC can accept this risk and enter into the subcontract.

정답：B

설명：
In FIDIC Yellow Book (1999), the Contractor is responsible for scrutinizing the Employer's Requirements per Sub-Clause 5.1 and must notify any discrepancies or errors. However, passing this obligation to a Subcontractor, and requiring the Subcontractor to indemnify the Contractor for errors or defects arising from the Employer's Requirements or the Contractor's design, unfairly shifts risk and liability to the Subcontractor.
The Subcontractor is likely not in a position to fully review or control the Employer's Requirements or the overall Contractor's design. This exposes the Subcontractor to excessive risk, beyond their scope and capacity.
Advice C highlights that the Subcontractor becomes vulnerable to claims for design defects outside their control. This misallocation of risk is generally not recommended and can be challenged during contract negotiation. Good contract management practice and risk allocation principles (FIDIC Contract Manager Study Guide, Module on Claims and Dispute Resolution) support this position.
While Options A, B, and D propose different approaches, only C correctly identifies the fundamental contractual and risk management issue that should prevent the Subcontractor from entering the contract as is.
References:
FIDIC Yellow Book 1999, Sub-Clause 5.1 - Contractor's General Obligations FIDIC Contract Manager Study Guide, Module on Claims and Dispute Resolution FIDIC Contract Manager Study Guide, Module on Risk Management

질문 # 45
......

PassTIP는 몇년간 최고급 덤프품질로 IT인증덤프제공사이트중에서 손꼽히는 자리에 오게 되었습니다. Medical Professional CCM 덤프는 많은 덤프들중에서 구매하는 분이 많은 인기덤프입니다. Medical Professional CCM시험준비중이신 분이시라면Medical Professional CCM한번 믿고 시험에 도전해보세요. 좋은 성적으로 시험패스하여 자격증 취득할것입니다.

CCM자격증문제: https://www.passtip.net/CCM-pass-exam.html

우리PassTIP 는 여러분이 100%Medical Professional CCM인증시험을 패스할 수 있다는 것을 보장합니다, IT업계 엘리트한 강사들이 퍼펙트한 CCM시험응시 Certified Case Manager Certification Exam (CCM)덤프문제집을 제작하여 디테일한 CCM문제와 답으로 여러분이 아주 간단히 Certified Case Manager Certification Exam (CCM)시험응시를 패스할 수 있도록 최선을 다하고 있습니다.덤프구매후 2,3일 정도만 공부하시면 바로 시험보셔도 되기에 가장 짧은 시간을 투자하여 시험에서 패스할수 있습니다, 하지만Medical Professional CCM패스는 쉬운 일은 아닙니다.Medical Professional CCM패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠, Medical Professional CCM시험덤프샘플 합격가능한 높은 시험적중율.

친구의 질문에 망자는 생긋 웃으며 답했다, 칼라일 황태자를 살리기로 결정한 이상, 최대한 빨리 그를 구해 내야 했다.데릭 오라버니는 지금 연무장에 계시지, 우리PassTIP 는 여러분이 100%Medical Professional CCM인증시험을 패스할 수 있다는 것을 보장합니다.

퍼펙트한 CCM시험덤프샘플 덤프 최신 데모

IT업계 엘리트한 강사들이 퍼펙트한 CCM시험응시 Certified Case Manager Certification Exam (CCM)덤프문제집을 제작하여 디테일한 CCM문제와 답으로 여러분이 아주 간단히 Certified Case Manager Certification Exam (CCM)시험응시를 패스할 수 있도록 최선을 다하고 있습니CCM다.덤프구매후 2,3일 정도만 공부하시면 바로 시험보셔도 되기에 가장 짧은 시간을 투자하여 시험에서 패스할수 있습니다.

하지만Medical Professional CCM패스는 쉬운 일은 아닙니다.Medical Professional CCM패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠, 합격가능한 높은 시험적중율, Medical Professional인증 CCM시험은 인기자격증을 취득하는데 필요한 시험과목입니다.

PassTIP CCM 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1Zb8C0c7W2IUpY9mJJwtsdznS3zCQ_plx